Product replacement or discontinuation is obviously quite usual - but that doesn't alter warranty obligations. The manufacturer should have stocked sufficient to meet likely needs. Without knowing the value. It is hard to know whether it is worth pursuing them; right now it sounds like they are ignoring you in the hope you just give up.
Thanks for your viewpoint and I couldn't agree more with you on this.
However, they have actually discontinued the product and their revised e-catalogue confirms this. I am sure they understand that a Purchase Order from us would just add on to their revenue in multiples at best, to risk such ignorance. Of the 28 product categories they have supplied, the issue affects only 1 of the 28.
The query deals around with
(a) non availability of spare parts of the product and
(b) non availability of the product itself.
1. Reply - Yes It happens when contractor's payment is to be made based on milestone basis and where delay from contractor's side concurrently delay from employer's side also during contract administration stage both parities contracts manager and PM don't sit to-gather to establish the delay attributed to which party, on other hand employer want the work to be completed with in laid completion dates. with found delay employ deploys third party manpower to complete work and adjust this cost from Contractor's Accounts under Employer's Claims.
2. Reply - can be replied based on type of contract is formed.
You can reach me offline over the email: email@example.com (Rajit Shah - Founder and Director, RPCPL)
I'm just trying to understand your position.
Considering that you are managing all contractual relationship with another company (buy and sell side) sounds actually good from your company perspective. It would mean, that your leadership can expect you to have a full overview about the contractually back and forth with this JF. Therefore I assume it's hard to change the mind of your leadership, since I would expect them to see your doublerole as positive.
However on the other side, there is your personal position, meaning being something in the middle of a sandwich, right? I'm not sure about your empowerment, but in worst case you have also very limited authority to change some company rules (discounts, penalties, payment conditions, acceptance criteria etc.). And on buy side you usually have different contractual expectation than on sell side. I assume, this is the tricky part in your situation. Fulfilling the internal requirements for buy- and sell side with the same contractual partner at the same time (and maybe also your partner asks you if you are a bit crazy, since requesting sooo different contracts when you are either on sell side or on buy side).
When the conditions your company expect in contracts are very different on sell side and buy side, this should be communicated as an issue (to your leadership). I think there are 2 options as solution: either the requested second CM as you suggest, or an escalation to the leadership to align clear buy and sell conditions between your company and the JF, which are equal to both parties. such framework conditions would make at least your position more clear. And maybe there won't be anymore need of a split of the CM roles buy side and sell side?
Since I couldn't find many information in your post, I hope, this is somehow helpful?
If your uncomfortable position has other reasons, please let me know.
• Omaha Public Power District
I probably would start collecting facts: Firstly, establish the relationship between Your Company ("Y Company") and Company X ("X Company") by looking at any specific, written agreement about the services ("X and Y Services"). Also, establish clarity around (1) Y Company's services to be provided to X Company, and (2) X Company's services to be provided to Y Company. At this point, are there any conflicts that you can see/anticipate in your ability as the Contract Manager during the provision of X and Y Services, that perhaps could result in non-performance or non-compliance? Also, how do you escalate and cure any issues of non-performance (for example)? Secondly, I would review the files documenting any legal review, if any, prior to said agreement being reviewed for signature/execution. Were there any concerns that were raised and eventually resolved (internally)? AT the very least, you could start with the resource allocation -- that is, regarding your time management and how to better allocate your skills - in developing your case. Hope this helps. Regards ~ Rose
Its an interesting role and I recommend your decision to bring in another manager to take one of the contracts.
I would recommend to present this as two different roles:
On the buy side - Contract Manager would play role of a customer and to manage Company X, need to drive and establish Vendor Management Discipline around Contract Administration / Governance / Service Performance / Financial Management / Risk and Compliance
On the sell side - Contract Manager would play role of an engagement partner to drive business relationship / Value addition to Company X/ increase revenue generation from Company X to your company / Joint go-to-market strategy if possible.
Based on IACCM´s contracting body of knowledge, we have conducted several ATEs and webinars stating the key steps for optimizing claim management transparent process.
Please refer to our IACCM library: www.iaccm.com/resources/contract-management-resources/ And in particular, in this topic: www.iaccm.com/resources/;
We will always recommend a constructive and non-hostile approach which will ensure we are improving quality and reducing the causes of counterproductive events.
However, if first level management cannot resolve the issue within a specified timeframe, it should be escalated to senior management. Only as a last resort should the agreement instruct the parties to resolve the claim by involving a third party. This could be either a court, an arbitrator or alternative dispute resolution, e.g. mediation.
In the absence of regulations in the agreement, most countries will have laws that similarly protect the injured party by third-party resolution. Both by law and under the terms of the agreement, therefore, claim management is not a voluntary process.
Let´s see if other members contribute with resposes in this forum, but I´d also recommend you, Julia, to join and connect with our IACCM community of interest created for this specific purpose: Dispute, Claim and Conflict Management: www.iaccm.com/gp/dispute
There are a lot of aspects to consider here, for example:
are you buying a replacement service from another vendor? if so, do you need the current vendor to support transition to the new vendor?
does the current vendor need to return any confidential documents?
are all payments up to date?
are any contract penalties (service credits, LDs) outstanding?
Irrespective of the above, you need to formally terminate the contract, confirming that neither party has any liability to the other following termination, except, perhaps, confidentiality provisions and, potentially, any latent defect/warranty claims. Simply 'allowing' the vendor to walk away seems odd: you spent time (and therefore money) on-boarding them and agreeing a contract, it seems strange to end the relationship in this way.
• Neptune Marine Service Ltd
What contract states with regards to email communication and authorized representative. If the contract only states that communications shall be in writing to the authorized representative. The next question that will arise is Governing Law of the contract. As some countries have adopted the United Nations Commission on International Trade Law (UNCITL) published its Model Law on Electronic Commerce in 1996 which states that actions will not be invalidated or discriminated against merely because they were conducted electronically and emails are considered as a message in "Writing"
So, make sure the message in "Writing" based on the governing law is communicated to the Authorised Representative.
For the balance checks, I agree with Steve Grange and that shall suffice.
I agree with Steve Grange. Create a formal Exit plan with the company to close off any outstanding liabilities to both parties. Regardless of each others 'mutual consent' to this. At the end of the that process formally close it off with a document. This will prevent anything coming back to bite you in the future.
• Siemens Pte Ltd
I agree with Steve, Gaurav and Phil, They have covered multiple aspects which we have to look at before letting the vendor walk off as I believe in this case Vendor has no financial impact on them so easy for them to walk off without formal termination/closure of the contract. But from the moment you accept or let Vendor walk out all the responsibilities more of liabilities fall on your company.
• Resolute Corporate Services Pty Ltd As Agent for Société Des Mines de Syama S.A (SOMISY S.A)
I think you should prepare an official document signed by both parties to legally and lawfully end this contract by a mutual agreement by both parties.
• Resolute Corporate Services Pty Ltd As Agent for Société Des Mines de Syama S.A (SOMISY S.A)
I think you should prepare an official document signed by both parties to legally and lawfully end this contract by a mutual agreement by both parties. your message
The first item to consider is to ensure to review the Services Agreement and review the Termination and Notices Section and any others that may come in to play when terminating an agreement. Are there a certain number of days after written notification that the services agreement will terminate? Are you terminating a master agreement and any ordering documents or SOWs or either or both? Do you need to provide notice to the contractor via email, mail, certified mail, overnight delivery? Does your agreement allow for electronic transmission communication as an acceptable method of communicating to make it legally binding in a notices provision?
I then also check to see if there are provisions such as Confidential Information/Materials or any other security items that need to be returned to your company that would need to be mentioned in a termination agreement or letter. Is there any confidential information, materials, laptop/pc, security badges and property that need to be returned and when, how and to whom? These are a few of a number of items may need to be addressed in a termination agreement along with ramp down services and whether there are any fees apart from standard fees that would need to be paid to considered. I have seen termination agreements be very simple with little to no instruction since the Services Agreement was simple straightforward agreement with little to be exchanged by way of CI, materials, goods, security, property and others that can run a few pages of negotiated ramp down services, transfer of services to another contractor or training and payment of ramp down costs at stake.
The answer depends on the exact wordings of the variation order. Does it explicitly provides that principal can take over that portion of work not done / delayed by contractor, at the cost and risk of contractor? It also depends upon the nature of work. Generally contracts provide for such an eventuality by giving notice (30 days or so) to contractor.