• Contract Manager Canada Inc.
If the project is delayed by the Employer... first make sure that there were no delay causes by the Contractor on the previous agreed milestones, for you to be fully eligible for a compensation. Now the tricky part to kick in, is the delay resulting to only warranty extension, which means that all construction, installation and pre-commissioning done? Just ensure that you've all signed-off documents that it's pre-commissioned. if so, your service team will provide an additional cost for extra-warranty coverage and you can lever it as a scope-creep. This is not an issue, if all of your works are completed and no more to come back to do additional works, then you need to add remob to commissioning cost plus the extended warranty cost and get a CO prior to agreement of extension. Don't forget to have your insurance company informed on this extension, as they were notified of previous warranty commitment, not the new one. Hope this serves.
• Seiersen Enterprises
It strikes me that the actual costs of extending the warrantee might be considered.
These may be nil if the delay in the project delays the in service date, and thus the risk of fault.
The onus might be put on the supplier to prove the materiality of additional warrantee costs whatever they might be.
• Capgemini India
As warranty effort is provisioned to fix bugs of contractor's defects, since the delay is caused by the Employer, the Contractor is entitiled to claim additional cost. Not only is this instance 'due to failure of the employer (customer)', which is not due to cause by the contractor, there could also be a delay in the service start date, which means the plans for service could be impacted. Therefore, I believe the additional cost is justified.
Our service department has actually been able to provide a number for us by unit of what an additional year of warranty costs us. Do you know how much the first year costs you? You could always just submit that as an estimate for year two.
New International Technology Co.
Mediocrity may apply at two levels - individual or process. In my experience, mediocre negotiators can still achieve good results if there is an excellent process, but the opposite may not be true. What do you think?
• New International Technology Co.
it is an interesting point ; in other words, how an individual can 'survive' a mediocre organization and tot only specifically on negotiations...or viceversa ; I have experienced both the cases: most probably an excellent process prevails, it has to, also because it would be difficult for an excellent individual alone to substantially modify a mediocre process ; but, again, that's very interesting from the point of view of dynamics
Bombardier Transportation Austria GmbH
The original ROI report led to further work captured in the Ten Pitfalls report.The 9.2% was an average bottom line loss made up of procurement and sales leakages; analysis shows significant variations by industry . Members who have used the data to support internal analysis have validated the study findings and showed many had even higher losses. You can use the Ten Pitfalls as a checklist of a sample of your contracts to see the extent to which such issues are occurring and the scale of impact.
Using the IACCM Maturity Model will also reveal which process weaknesses are adding to the losses.
Picking up on Jennie's reply, we used the ten pitfalls in the way indicated and have been able to generate substantial revenue improvements as a result. Our work looked at just sales contracts and is for capital projects and support services in the oil and gas sector. The approach we took was to explore how many of our agreements delivered below forecast revenues and / or margins And focus initial analysis on those
Me too. I would be interested to hear what others have found in selection of a CLM.
I am not a buyer of CLM solution but a seller. I work for EY and have developed a easy plug-in and use SharePoint based CLM solution. Would be happy to participate in the RFP/RFI process. My email ID is: Kulbir.email@example.com.
As for my tool the below features are available at extremely reasonable pricing and very easy to use format.
Integration with Clients' system
Repository of Contracts
Templates uploading and downloading
OCR File Scanning
Dashboards and Reports
Alert and Notifications
Multiple Filtering options
Selecting form Templates
Download Reports/Export meta data to excel
Upload templates to a selected workspace
Create new user accounts
Reset user accounts
Edit access to users
create new workspace
upload templates to a master database
Easily Customizable App UI
Contract Clause Library
Intake form that can integrate with single sign on (SSO)
Compliance with other regulations
• Fire and Emergency NZ
Hi Geoff. We found a lot of the systems on the market, whilst all really good, focussed on workflow. Emails and notifications of moments and issues galore. I've always found that you don't need that if you have the right team, this isn't needed. They know what thy have to do, what stage in the process and when. So that for me was a major issue.
The second thing is a lot of them have lots of functionality around the back and forth and negotiation of clauses. I'd suggest again if you have really good templates and good early engagement, you reduce the back and forth required and can get the benefits of quicker turnaround and e-signatures without a bigger system.
I would flag that you should not underestimate the work required to get your current information into the new system. It's probably going to be more than the annual fees to set up. In the RFP / RFI - get them to tell you their plans and costs for getting the records in the system. It's not just the scanning of records, but also the information in the contracts (milestones, conditions) that need to come in.
Finally, I'd really recommend that you bring in as many people as possible into this process, especially in the procurement team. The users and the team are the ones that will have to use this solution going forward and keep your records in that format for all of those wonderful visuals and reports that the new system spits out. I've seen and heard of many instances where the new CLM has failed because the team and users haven't brought into the solution.
We've been lucky with our solution (it's a simple one that we developed in house) because :
(a) it wasn't an all at once deployment. People have had time to think about the system and what it could do
(b) the team have then been able to take the system to an even higher level than anything I had in mind. Templates for contracts, evaluation and issues registers - all really awesome stuff that went way beyond my initial ideas.
I hope this aids your thinking, and if you want to talk further, please message me.
• BDO LLP
I saw your post this morning and wanted to reach out about your question. I lead the consulting practice at BDO USA LLP that focuses on precisely the scenario you are asking about. We are solution/platform agnostic and seek to ensure the "right" solution - regardless of vendor - is selected so that something that is too big or too complex isn't inadvertently chosen from the many, many good solutions out there. Feel free to give me a call at 703-770-4453 or email at firstname.lastname@example.org. I'd be happy to share my thoughts with you. Thanks! Tom
In the US, Texas or New York are largely considered "neutral territory" whereas in Europe, until very recently UK law was considered neutral. I think that may change with the recent political upheaval.
In terms of the 8 different payment schemes I was specifically referring to what we call 'payment curves' (see attached graphic) as opposed to payment regimes such as cost+ (time and material), fixed price, cost + fixed fee, etc. In this light these are grouped into 5 main families with a couple of variations inside each. These are as follows:
- 'all or none' payment curves
- Linear payment curves
- Non-linear payment curves
- Alternative payment such as demerit point and visual payment curves
- Matrix payment curves
The intent of this discussion is to simply highlight that the choice of payment curve, similar to the choice of performance measure and level, can have a significant impact on the success (or otherwise) of the overall performance management framework. My blog (www.performancebasedcontracting.com) has 3 posts specifically on this topic including the graphics.
I hope this helps and answers your questions. However, please let me know if you have any further questions.
Whilst it's the way that a lot more suppliers seem to be going, if you think about this in with your procurement hat on - and that is what's going to happen at the end of 3-5 years - it's tough to see you doing anything but just rolling this over (and over and over again) as someone else has all of your data on their server.
At the risk of being awfully contentious, my own experience is that in a lot of circumstances, there's little consideration of whole of life costs - especially with that thinking about what's to happen in 3-5 years. Right now, many of these purchases done right now are flying under the radar of procurement teams because they're below procurement limits or just being called operational expenditure within business delegated authorities.
That said, one of the benefits that I've also seen is that upgrades happen automatically on the server of the host without the business having to create teams to do this, especially where there was a major upgrade - which were previously a big financial impact on many businesses.